Affichage des résultats 1 à 45 sur 51
Discussion: m/42
Vue hybride
-
05/03/2006, 14h30 #1
- Inscription
- August 2005
- Localisation
- Bretagne
- Messages
- 1 203
- Boîtier
- Canon
- Objectif(s)
- Juste ce qui est nécessaire... ;-)
Canon-passion super ton nouvel avatar
Bon sinon pour ma part sur mon eos 300d j'ai pris un stigomètre aussi de chez fuhaoda mais j'ai du mal encore à faire la MAP surtout en intérieure. Sinon merci pour le retour d'expérience sur le chip AF.
-
05/03/2006, 22h18 #2
- Inscription
- March 2006
- Localisation
- Switzerland
- Âge
- 55
- Messages
- 26
- Boîtier
- 20D
- Objectif(s)
- profiter de la vie et les votres ?
Pour faire avancer le schmilblick,
Un utilisateur content avec cette puce, en gros, l'ouverture indiquée reste a 2.8.
Ca marche parfaitement il faut juste ajuster plus lentement lorsqu'on approche de la mise au point.
Dans ce cas le collimateur s'allume et le bip se fait entendre.
Ok avec 50 F1.4 et 500 F8
http://forums.dpreview.com/forums/re...2&changemode=1
Actually with my f=1.4 lenses it works just perfect, I've even heard that it works with a mirror lens 500/8, although this chip always says to camera that an opened apperture is 2.8. So I just like it, now I have more time to make a composition not loosing a lot of time for precise focusing. And yes, you're right, it's necesary to turn a focus ring a bit slower when you're almost near focus point.
I think that before making any suppositions a suspicious person should read at least a documentation about Canon AF system
for example here:
http://www.fredmiranda.com/forum/topic/241524
Arjen van Andel wrote:
> > My guess is it will be probably much less
> > accurate than split prism screen and even less accurate than AF
> > with AF lens.
>
> That should not be the case. The only difference is that you are
> now the DC or USM motor. The AF sensor of the camera still does the
> 'real' work. Just take your time and don't twist the ring too fast
> when approaching focus, because a motor stops quicker than you.
>
> When you hear a beep or see the focuspoint light up you have (or
> had, if you are to hastely) perfect focus (within the camera's
> specs, which may depend on the f-stop used during focussing).
>
-
05/03/2006, 23h33 #3
- Inscription
- January 2006
- Localisation
- maison individuelle
- Âge
- 49
- Messages
- 1 429
- Boîtier
- eos 5 eos 20D
- Objectif(s)
- être utile
C'est vrai que ça vaut le coup de se prendre la tête pour trouver une solution pour la mise au point car les "bouses" sont encore très respectables. Pour exemple cette photo prise cette après midi avec un pentacon 4/300.
- EXIF: Canon ( EOS 20D) | 1/2000s | ISO 200
Informations de la discussion
Utilisateur(s) sur cette discussion
Il y a actuellement 1 utilisateur(s) naviguant sur cette discussion. (0 utilisateur(s) et 1 invité(s))