Oui erreur 80 = pb d'obturateur
Pas pour moi, l'obturateur c'est 30, parfois 20, 80 c'est un plantage Cpu généralement. Cela peut ne jamais revenir, comme ton appareil a 1 mois rien d'inquiétant, cela te laisse le temps de voir venir, tu serait a un mois de la fin garantie ce serait plus genant. Si cela doit arriver a nouveau fait une photo de l'appareil avec l'erreur affichée et si possible le n° de serie ( a 45 degre cela doit passer), avec une panne intempestive cela règle tout soucis.


Liste des codes erreurs 7D : http://support-au.canon.com.au/conte...200579100.html
# Err 01
Communications between the camera and lens is faulty. Clean the lens contacts.
-Clean the electrical contacts on the camera and lens.
-Use a Canon lens.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center.

# Err 02
Card cannot be accessed. Reinsert/change card or format card with camera.
-Remove and install the card again.
-Replace the card.
-Format the card.

# Err 04
Cannot save images because card is full. Replace card. -Replace the card.
-Erase unnecessary images on the card.
-Format the card.

# Err 05
The built-in flash could not be raised. Turn the camera off and on again.
-Turn the power switch to to turn on the power again.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center.

# Err 06
Sensor cleaning is not possible. Turn the camera off and on again.
-Turn the power switch to to turn on the power again.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center.

# Err 10,20,30,40, 50,70,80
Shooting is not possible due to an error. Turn the camera off and on again.
-Turn the power switch to to turn on the power again.
-Remove and re-install the battery.
-Use a Canon lens.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center.

# Err 10
Malfunctions related to files have been detected.

# Err 20
Malfunctions related to the mechanical mechanism have been detected.

# Err 30
Malfunctions related to the shutter have been detected.

# Err 40
Malfunctions related to the power source have been detected.

# Err 50
Malfunctions related to the electric control have been detected.

# Err 70
Malfunctions related to images have been detected.

# Err 80
Malfunctions related to the electric control or images have been detected.